Adding an entirely new faucet can give your kitchen or bathroom a completely different look with a whole new function. Basic faucet installation could make for a perfect water flow as well as a completely leakproof system, whether it is replacing an old faucet or installing a new one. Some people would rather hire a professional to do the job than do it themselves, but with the proper precautions and proper steps to follow, it’s not that hard doing it by yourself.
Tools and Materials Needed for Faucet Installation
Get all the tools and materials so that the installation process is as smooth as a buttered slide:
- Adjustable wrench
- Basin wrench
- Plumber’s tape
- Bucket or small container
- Towels or rags
- Screwdriver
- Plumber’s putty or silicone sealant
- Supply lines (if not included with the faucet)
Step-by-Step Guide for Faucet Installation
Step 1: Turn Off the Water Supply
Shutting off the supply first is what should be given priority before removing the old faucet. In almost all sinks, there are two shut-off valves underneath, one for cold water and the other for hot water, turning it clockwise to limit the water flow. If neither valve is available, then you may consider shutting off the whole house’s main water supply instead. Finally, turn on the faucet and drain the rest of the water into the bucket to release all the water pressure that still remains.
Step 2: Remove the Old Faucet
- Employ an adjustable wrench to unfasten the pipes connected to it. In the case of stubborn fittings, prefer using a basin wrench for better leverage.
- Remove the mounting nuts securing the faucet. A basin wrench might be necessary for access to tight areas.
Step 3: Clean the Sink Area
After pulling up and out on the old faucet, you should then wipe down the sink surface of any grime, rust, or old plumber’s putty. Smoother surface allows tight seals to be made for the new faucet installation.
Step 4: Install the New Faucet
- Installation of a Faucet:
Place the new faucet over the sink’s fitting holes in such a way that the faucet’s handle is correctly oriented. - Setup of a Faucet:
Go under the sink and connect the nuts of the installation before using the basin wrench to tighten the affixing nuts on the faucet.
These should not be attached too tightly, as it could either break the faucet or damage the sink.
Step 5: Turn on the Water and Test for Leaks
- Gradually turn on the valves for the water supply.
- Turn on the faucet to see whether the water flows out smoothly.
- Check every connection for leaks. If you find any drips, tighten the connections or add more plumber’s tape.
Faucet Installation Cost: How Much Should You Expect to Pay?
The faucet installation cost can be calculated primarily on the complexity of the faucet and whether any extra plumbing is necessary before installation. A list of all the possible costs is as follows for the necessary plumbing purposes:
DIY Faucet Installation Costs:
- Faucet: $50-300 (depending on the brand and quality)
- Tools and Materials: $20-50 (if you don’t already own them)
- Total Estimated cost: $70-350.
Professional Installation Costs
- It is $100 to $250 for basic faucet installation;
- $250 to $500 for installation plus any additional plumbing work;
- and more than $500 for luxury or custom faucet installation.
A professional makes sure there is no hassle during installation while ensuring that the entire job is done right.
Faucet Repair in Mississauga: When Installation Isn’t Enough
Sometimes, a full replacement isn’t necessary. For leaking taps, weak water flow, or inconsistent temperature control, professional faucet repair in Mississauga can be a smart, cost-effective solution. Skilled plumbers in the area can quickly diagnose and repair common faucet issues, saving you time and preventing water damage.
Choosing the Best Faucet Installation in Toronto
Plumbing Installation of Kitchen Faucets in Toronto
You can find many plumbing services in Toronto for professional kitchen faucet installation. Here is how to get the right one:
- Confirm Licensed and Experienced Plumbing Professionals
Included in the same bunch were entrepreneurs willing to perform kitchen faucet installations, given that they had their licenses and insurance ready.
- Reviews and Testimonials
Customer reviews speak of the reliability of the service and the quality of the service. Check out the Google Reviews, Yelp, and HomeStars sites for the best faucet installation in Toronto.
- Get an Estimate
Before hiring a plumber, take a written estimate from him. It should specify all details about the labor and material cost and any incidental charges as well.
- Warranty and Guarantees
A famous plumber should be able to guarantee the work he performs and the material he uses.
Common Mistakes to Avoid During Faucet Installation
- Cutting-off Water Supply: Shut off the water supply before all else. This can result in flooding.
- Too Tightly Fixing Joints: This can cause the pipe to crack or damage the faucet.
- Making Use of Plumber’s Tape: Not sealing joints properly may lead to leaks.
- Misaligning a Faucet: Make sure it has been correctly aligned before all of it is tightened.
- Failing to Test for Leaks: Always run a test on the faucet before wrapping the installation up.
Conclusion
Installing a faucet has its own good rewards when you do it yourself, but it requires patience and special tools. An average person can install a kitchen faucet himself in less than an hour when he is comfortable working on plumbing. If the entire process should be done without all that frustration, hire a professional.
The cost of faucet installation adds to how to determine the best faucet installation in Toronto; the much that can be spent will be under budget. Whichever way you choose, install your faucet well, for it is an important part of the functionality of your house.
The next time you’re sprucing up your kitchen or bathroom, break this guide out and start installing that faucet right!
